Avantco Ice Machines are available at these select retailers:
With this C Pure Oceanloch-S water filter system, it's easier than ever to make fast, sanitary filter changes and keep your water-using equipment protected against harmful contaminants at the same time! This system is designed to filter out sediment particles as small as 1 micron, while also removing undesirable colors and chlorine taste / odor. It also inhibits the growth of scale deposits, which reduce equipment efficiency and will eventually cause vital components to fail if left untreated. It's an ideal solution for small ice machines and undercounter ice machines that produce 125 lb. or less per day.
C Pure's Oceanloch filters feature an exclusive twist-in locking mechanism that makes it incredibly easy to change a cartridge when it has reached the end of its life. With a simple twist you can unlock the old cartridge and remove it, and twist the new cartridge to lock it into place. This design also improves sanitation because the whole cartridge is self-contained and the filter media isn't exposed to outside contaminants. No exposure means a much lower chance for pathogens to enter the filter and grow, and that means greater peace of mind about the water going to your customers!
This filter system has a flow rating of 0.75 GPM and a 6,000 gallon capacity. The pressure gauge allows you to check the water pressure going out of your filtration system to ensure your equipment is getting the required PSI to operate, or indicate when it's time to change your cartridge out. The filter cartridge must be replaced every 3-6 months, or at the rated capacity, or if a noticeable reduction in flow rate occurs. The Oceanloch twist-in design is unique to Oceanloch filters and is not compatible with filter systems from other lines. This filter system also includes an installation kit to make setup as simple as possible. The inlet shutoff valve makes it easy to stop incoming water upstream of the filter so that you can change out a cartridge or perform maintenance. The filter system has 3/8" NPT female input and output connections and includes 1 outlet tee connection and 1 pressure gauge.